Product Overview
The EALITA Hydraulic Heavy-Duty Orange Peel Waste Grab is a large-format forklift attachment engineered for high-volume scrap metal collection, bulk industrial waste handling, and large-format log and timber waste processing across heavy-duty scrap metal recycling yards, steel processing plants, foundries, large-scale waste processing facilities, and industrial bulk material handling environments that require a higher-capacity grab solution than standard 3-tonne class attachments can provide. Designed specifically for Class 3A forklifts in the 4–4.5 tonne range, this hydraulic waste grab delivers the jaw capacity, opening range, and structural mass required to handle the larger, denser, and higher-volume material loads that exceed the operational limits of lighter 3–3.5 tonne grab configurations — making it the preferred choice for heavy industrial operations where maximum material throughput per grab cycle is the primary performance requirement.
The large-format multi-jaw grab mechanism operates across a working opening range of 605 mm to 1,977 mm — a jaw spread that accommodates the full range of large-volume scrap metal accumulations, oversized iron pin bundles, large-diameter log sections, and high-density mixed industrial waste loads encountered in heavy-duty processing environments. The minimum jaw opening of 605 mm ensures that the grab maintains positive clamping engagement on dense, compacted material loads even at minimum jaw extension, while the maximum 1,977 mm opening provides the jaw spread required to envelop and collect large-volume loose material piles in a single grab cycle. This wide operating range makes the grab equally effective across the full spectrum of material densities and pile configurations encountered in active heavy industrial scrap and waste handling operations.
The heavy-duty grab frame — measuring 810 mm wide, 2,860 mm deep, and 2,105 mm high and weighing 760 kg — is dimensioned and constructed for the structural demands of 4–4.5 tonne class forklift operations where attachment mass, jaw force, and structural rigidity must be scaled to match the higher hydraulic output and load capacity of the host forklift. The larger frame dimensions provide a broader jaw engagement envelope compared to the 3-tonne class grab configurations, allowing the attachment to collect larger material volumes per cycle and to reach deeper into high-volume scrap piles and waste accumulations without requiring multiple partial-load grab cycles to clear the material. This larger-per-cycle collection capability directly reduces the total number of grab cycles required to process a given material volume, improving operational throughput and reducing forklift operating hours per tonne of material handled.
The three-circuit hydraulic system provides independent control of jaw opening and closing, rotational positioning, and additional actuation axes required for full multi-directional grab operation from the forklift cab. The system operates at a working pressure of 16 MPa with a hydraulic flow requirement of 60 LPM, parameters matched to the auxiliary hydraulic output of standard Class 3A counterbalance forklifts in the 4–4.5 tonne class equipped with three hydraulic valve circuits. The three-circuit configuration enables simultaneous control of jaw position and grab orientation, allowing the operator to align the grab precisely with irregularly positioned material piles and to orient the collected load accurately for deposit into processing equipment, transport vehicles, and waste containers without dismounting or manual load adjustment.
The robust welded high-strength steel construction of the jaw assembly, grab frame, and mounting interface is engineered to withstand the elevated impact, abrasion, and compression loads generated during high-cycle heavy-duty scrap metal and industrial waste handling operations at 4–4.5 tonne forklift capacity. The jaw segments and frame members are dimensioned to maintain structural integrity and jaw alignment under the maximum clamping forces generated by the 4-tonne class hydraulic system — ensuring consistent grab performance and dimensional stability across thousands of operational cycles in the demanding conditions of active heavy industrial scrap yards, foundry waste areas, and large-scale waste processing facilities.
Whether you are loading large-volume scrap iron accumulations onto transport vehicles at a heavy-duty metal recycling yard, handling dense iron pin and swarf waste at a steel processing plant, collecting and transporting large-diameter log waste at a timber processing facility, managing high-volume mixed industrial waste at a large-scale waste processing center, or clearing bulk material accumulations across a heavy industrial manufacturing site, the EALITA Hydraulic Heavy-Duty Orange Peel Waste Grab delivers the 605–1,977 mm jaw capacity, three-circuit hydraulic control, and 4–4.5 tonne class structural strength your operation needs to handle every large-volume waste and scrap material load at maximum throughput — every grab, every load, every shift.
Details
Features:
·Waste Grab
·Requires 3 additional oil circuit for the forklift
Specifications:
|
Type |
Class |
Dimension(WDH)/mm |
Opening Range(OR)/mm |
Operating Pressure/MPa |
Hydraulic Flow/LPM |
Weight/kg |
Suit Forklift/T |
|
F-DBYMJ3A40 |
3A |
810×2860×2105 |
605-1977 |
16 |
60 |
760 |
4-4.5 |
Technical Drawing:
