The fixed hydraulic dock leveller is handling with the storage platform auxiliary equipment, this equipment and the platform one, according to different height adjustment can increase freight cars can also be cut, convenient for forklift into cars, equipment imported hydraulic pump station, both sides has anti rolling apron, work more safety, improve the work efficiency.
Type:
WS-GT10-2160*2200*490Surface Treatment:
Green Painting or As Request
The main board and the overlap board are made of non-slip patterned steel plate, which makes the platform have good non-slip performance, and the thickness of the national standard is 8mm/16 mm.
6 pieces Unique special "I" steel skeleton, make the support more stable and average.
The unique "streamlined" opening joint design increases the number of weld positions by more than 3 times compared to other tube-welded joints, making it stronger and easier to clean.
Without extending the hitch plate, the adjusting plate can still be lowered to the lowest position by pulling on the support feet (best suited for 4, fully loaded short trucks for loading and unloading the first row of goods).
400mm long hitch plate, can extend to the collision avoidance rubber 250mm, ride on the truck at least 150mm, more safety.
The electric control part is extremely simple, press the button to raise the adjusting plate to the highest position and then release it so that the hitch plate can be used on the truck. The hydraulic principle is utilized to raise the main platform and the loose-leaf hitch plate, which is more reliable. When loading and unloading goods, it relies on the steel frame to bear the weight, and the hydraulic system only plays the role of lifting the equipment itself, so there are few failures.
Safe support foot design to safely support the adjusting plate, when the table plate is 100mm higher than the platform, even if the forklift accidentally drives away from the platform, the adjusting plate can still maintain the horizontal position, minimizing the risk of the forklift falling from the adjusting plate.
Safety maintenance spacer to hold up the adjustable plate for easy maintenance and cleaning of the pit.
Use 380V/50HZ ordinary AC power, convenient and safe.
The rear of the adjusting plate has a fixed back page safety design, which effectively avoids the possible danger of a gap or bulge at the rear of the adjusting plate when the loading and unloading trucks are unbalanced.
Specification：
Type：WS-GT10-2160*2200*490
Overall size： 2160*220*490mm
Capacity：10tons
power supply：380V/50HZ
adjustable range：+300/-300mm
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Type F-CRN65 Container Ramp is designed for bridging into standard containers from ground level.
Designed to allow access into standard shipping containers that are located at ground level.
The type F-FCR65 Container Ramp has an overall length of 1.5 meters allowing easy placement and removal of the first and second line of pallets in a container.
This container ramp is heavy duty ramp for unloading containers of heavy products using a forklift.
This 8 tonne ramp is a heavy duty ramp for unloading containers of heavy products with a large forklift.
The type F-CRL8 heavy duty 8 tonne extra long container ramp has an overall length of 3 meters.
This is a extra long container ramp of 6 tonne capacity.
Double door ramp platforms can save time to safely access containers. Made of heavy duty durable steel, suitable for any type of working environment.
12 Jiangshan Road, Longzhou Industrial Zone, Longyan, China
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2024 Longyan Ealita Machine Manufacture Co., Ltd All Rights Reserved.
IPv6 network supported
English
